-------------------------------------------------------------------------------
Fix Number: FJSVfsep-POOL2-15-1501-0.el9.x86_64
Product Names and Versions: Fujitsu Enterprise Postgres Pgpool-II 15

Creation date: 25.09.2023
-------------------------------------------------------------------------------

 [High Risk Activity]

  The Customer acknowledges and agrees that the Product is designed,
  developed and manufactured as contemplated for general use, including
  without limitation, general office use, personal use, household use, and
  ordinary industrial use, but is not designed, developed and manufactured
  as contemplated for use accompanying fatal risks or dangers that, unless
  extremely high safety is secured, could lead directly to death, personal
  injury, severe physical damage or other loss (hereinafter "High Safety
  Required Use"), including without limitation, nuclear reaction control
  in nuclear facility, aircraft flight control, air traffic control, mass
  transport control, medical life support system, missile launch control
  in weapon system. 

  The Customer, shall not use the Product without
  securing the sufficient safety required for the High Safety Required
  Use. In addition, Fujitsu (or other affiliate's name) shall not be
  liable against the Customer and/or any third party for any claims or
  damages arising in connection with the High Safety Required Use of the
  Product. 

  Product and company names mentioned in this manual are the trademarks or 
  registered trademarks of their respective owners.

  Copyright 2023 FUJITSU LIMITED

-------------------------------------------------------------------------------
[Notes]
  - This is the readme for RHEL 8.
  - This fix is applicable to environments where the following are installed.
    Fujitsu Enterprise Postgres Pgpool-II 15
  - Please ensure that the following steps are carried out before applying or
    deleting this patch.
    - Stop the running Pgpool-II.

-------------------------------------------------------------------------------
[Patch Description]

 The following fixes are included in this patch:

Fix Number: FJSVfsep-POOL2-15-1501-0.el9.x86_64
01    PH22849
      [*]Security failure
      [*]Serious failure ([ ]Degradation)
      [*]Incompatibility does not exist / [ ]Incompatibility exists
      - Frequency ([*]Always / [ ]Rarely / [ ]Irregularly)

      - Description
        This fix reflects fixes up to OpenSSL 1.1.1t in this product 
        and does not indicate any specific symptoms.
      - Requirements to reproduce this issue
        This fix reflects fixes up to OpenSSL 1.1.1t in this product 
        and has no specific occurrence conditions.
        To check the details of the changes up to OpenSSL 1.1.1t, click
        See the OpenSSL release notes.
        https://www.openssl.org/news/openssl-1.1.1-notes.html
        The version of OpenSSL in which this product reflects the correction 
        is as follows.
         - Enterprise Postgres Pgpool-II 15
          1.1.1t, 1.1.1s, 1.1.1r, 1.1.1q, 1.1.1p, 1.1.1o, 1.1.1n, 1.1.1m
      - Action
        Apply OpenSSL changes to the product.
      - Compatibility Information
        None.

-------------------------------------------------------------------------------
[List of fixed files]

 Files replaced by the patch:

    $INS_DIR/bin/pcp_attach_node
    $INS_DIR/bin/pcp_detach_node
    $INS_DIR/bin/pcp_health_check_stats
    $INS_DIR/bin/pcp_node_count
    $INS_DIR/bin/pcp_node_info
    $INS_DIR/bin/pcp_pool_status
    $INS_DIR/bin/pcp_proc_count
    $INS_DIR/bin/pcp_proc_info
    $INS_DIR/bin/pcp_promote_node
    $INS_DIR/bin/pcp_recovery_node
    $INS_DIR/bin/pcp_reload_config
    $INS_DIR/bin/pcp_stop_pgpool
    $INS_DIR/bin/pcp_watchdog_info
    $INS_DIR/bin/pg_enc
    $INS_DIR/bin/pg_md5
    $INS_DIR/bin/pgpool
    $INS_DIR/bin/pgpool_setup
    $INS_DIR/bin/pgproto
    $INS_DIR/bin/watchdog_setup
    $INS_DIR/bin/wd_cli
    $INS_DIR/etc/aws_eip_if_cmd.sh.sample
    $INS_DIR/etc/aws_rtb_if_cmd.sh.sample
    $INS_DIR/etc/escalation.sh.sample
    $INS_DIR/etc/failover.sh.sample
    $INS_DIR/etc/follow_primary.sh.sample
    $INS_DIR/etc/pcp.conf.sample
    $INS_DIR/etc/pgpool.conf.sample
    $INS_DIR/etc/pgpool_remote_start.sample
    $INS_DIR/etc/pool_hba.conf.sample
    $INS_DIR/etc/recovery_1st_stage.sample
    $INS_DIR/etc/replication_mode_recovery_1st_stage.sample
    $INS_DIR/etc/replication_mode_recovery_2nd_stage.sample
    $INS_DIR/include/libpcp_ext.h
    $INS_DIR/include/pcp.h
    $INS_DIR/include/pool_process_reporting.h
    $INS_DIR/include/pool_type.h
    $INS_DIR/lib/libcom_err.so.3
    $INS_DIR/lib/libcrypto.so.1.1
    $INS_DIR/lib/libgssapi_krb5.so.2
    $INS_DIR/lib/libk5crypto.so.3
    $INS_DIR/lib/libkrb5.so.3
    $INS_DIR/lib/libkrb5support.so.0
    $INS_DIR/lib/liblber-2.4.so.2
    $INS_DIR/lib/libldap-2.4.so.2
    $INS_DIR/lib/libldap_r-2.4.so.2
    $INS_DIR/lib/libpcp.a
    $INS_DIR/lib/libpcp.la
    $INS_DIR/lib/libpcp.so.2.0.0
    $INS_DIR/lib/libpq.so.5
    $INS_DIR/lib/libssl.so.1.1
    $INS_DIR/share/pgpool-II/insert_lock.sql
    $INS_DIR/share/pgpool-II/pgpool.pam

-------------------------------------------------------------------------------